Problem: When a .NET test starts for the 1st time for the day, a Test execute message appears.
After answering OK the popup goes away and will not appear unless the
workstation is restarted.
Root cause: According to http://www.registrygenius.com/dll-errors/tcRTL.bpl.html, the problem is caused by a corrupt environment.
Solution: To overcome the problem of the tcRTL.bpl error:, please try following the steps below:
1. Uninstall TestComplete.
2. Remove the folder in which the tool was installed.
3. Reboot the machine.
4. Install the tool once again.
5. Reinstall Microsoft Script Debugger using the link below:
Microsoft Script Debugger.
6. Check whether the problem can be reproduced.
If this does not resolve the problem, please file a case with Worksoft Support. If you were forwarded to this page by a Worksoft Support Engineer, please update the Case with your results.